Wideband is installed... pics...

342sunsetZ · 03-22-2009, 09:50 PM

I couldn't find a pod i liked for the guage so figured i'd try something else out. still want to trim on the vent about another .5" to bring the guage farther out, but i thought it looked alright... still need to trim up the plastic pieces on each side where the vent set.
I'm excited though, get to start tuning it this wkend. And hopefully gomer will have my tune done by then to so i can check it out, but anyone know where the EGR pin is that i have to piggy back off of to data log with hptuners?

Oh, and special thanks to tater for wiring this ****...haha I owe the shop prob. about a week worth of work now..lol..

JASON · 03-22-2009, 09:56 PM

have you talked to Gomer?

342sunsetZ · 03-22-2009, 09:59 PM

yup sent him an email and he replied last week and sayed he'd get me one together... I can never reach him by phone.

**Fenster** · 03-23-2009, 06:45 AM

Which Wideband did you go w/?

I've still got to play with my LC-1. I've never gotten it to work right, but haven't messed with it a ton since I installed it... but then again the car hasn't moved a whole lot since I installed it!!!

**TATER** · 03-23-2009, 07:08 AM

Quote:

Originally Posted by Fenster

Which Wideband did you go w/?

I've still got to play with my LC-1. I've never gotten it to work right, but haven't messed with it a ton since I installed it... but then again the car hasn't moved a whole lot since I installed it!!!

The install is a bitch with all the BS grounding requirments.. I really dont think they can make any sensor more complicated to install! Justins actually went in like a breeze tho, just took some extra time to lay it all out in my head

**Fenster** · 03-23-2009, 09:34 AM

Quote:

Originally Posted by Tricked-Out-Toy

The install is a bitch with all the BS grounding requirments.. I really dont think they can make any sensor more complicated to install! Justins actually went in like a breeze tho, just took some extra time to lay it all out in my head

Yeah I need to go back and re-install mine again after trying to figure out the issues. Maybe I'll run out sometime and you can try and work your magic!

I'm working on getting a Holley Commander 950 for the car to b/c the stock computer is giving me fits on tuning. From what I've read, that should be easy compared to the LC-1!!! Plus it should give me room for significant growth!

I'll be glad to have the factory engine harness out of the engine bay too... 20 years hasn't been too kind to it!

**CamTom12** · 03-23-2009, 11:34 AM

Ok, it's been a while since I did this, and I don't have my car around to reference, but I think it was pin 55 on the blue connector. I think it was a brown wire.

Then you have to play some games in the HPTuners, but I'm sure Gomer can help you with that one. I don't have my log set-up file to reference either, all that's on my tuning computer... For sure you have to enable EGR in the tune, then it's just a matter of setting up the scanner to read it

EDIT: Found it!

http://www.tnfbody.com/forum/showthread.php?t=5059

fbodygrad · 03-23-2009, 03:41 PM

man...very clean....got one question...

CAN I PUSH THE LITTLE RED BUTTON?????

speedyhawk101 · 03-23-2009, 10:23 PM

Look s good Justin.

1redTA · 03-24-2009, 09:27 AM

looks nice

03-22-2009, 09:56 PM	#2
JASON MTFBA Member Join Date: Jul 2003 Location: PARTS UNKNOWN Posts: 861 JASON's Timeslips	have you talked to Gomer? __________________ Sending folks back to the drawing board since 1995

03-23-2009, 06:45 AM	#4
Fenster Super Moderator Join Date: Dec 2002 Location: Nashville Posts: 10,167 Fenster's Timeslips	Which Wideband did you go w/? I've still got to play with my LC-1. I've never gotten it to work right, but haven't messed with it a ton since I installed it... but then again the car hasn't moved a whole lot since I installed it!!! __________________ Chris - Formerly Chris89GTA White '89 TA: 355 cid, TFS 23* heads, 227/233 112LSA cams, Holley Stealth Ram, Hedman LT headers, Hooker Catback, Probuilt 700r4 w/ Edge 3400 2.4 STR converter, Zexel Take-Off Diff w/ 3.42 gears. Past Vehicles: 1986 Maroon C4 2000 Red Camaro SS M6 2004 Quicksilver/Red A4 GTO

03-23-2009, 03:41 PM	#8
fbodygrad Barn Yard Custom Join Date: Sep 2006 Location: Mtn. City Posts: 2,581 View Photos By: fbodygrad fbodygrad's Timeslips	man...very clean....got one question... CAN I PUSH THE LITTLE RED BUTTON????? __________________ Chip Gentry Mine: 00' Z28 A4 Onyx Black...not stock but not exactly running either..... 06' 3500 GMC My Wife's: 09' Blue Honda Civic EX-L 10' Black Harley Davidson Wide-Glide 09' Metallic Red Busa'

03-24-2009, 09:27 AM	#10
1redTA MTFBA Member Join Date: Apr 2003 Posts: 805 View Photos By: 1redTA 1redTA's Timeslips	looks nice __________________ 96 Trans Am M6....Red Headed Slut stock..... full of parts and cubic dollars Art Deckbar