anyone need anything?

[danhr]

I might be coming down to tn soon. figured I'd give you guys a heads up to see if anyone wanted anything from up here, that way I could just throw them in the back of my truck. So if you need any body panels or hoods or such now, let me know... I'll see what we have and what's around. I think we have 2 or 3 low mileage dropouts as well.

I know I'm still sitting on (because I haven't really been pushing on selling it):

Red UMI torque arm. tunnel mounted with a driveshaft loop. It's their newer design and is for long tube headers.

Moser 9". detroit locker, 31 spline axles. longer arp wheel studs, umi lca relocation brackets welded in, has lt1 backing plates on it. nodular center section. rattle can painted red by the infamous Blue (you just can't get that kind of work done anywhere).

Two cams:
228/232 .588/.595 114lsa
249/256 (can't remember the lift off the top of my head... will get the cam card if someone is interested) 113 lsa

some of mater's craigslist ads:

http://pittsburgh.craigslist.org/sea...breviation=sss

stock length forged eagle crankshaft for ls1

1998 H/C/nitrous Corvette http://www.pittspeed.com/showthread.php?t=51093 asking 16500



Since one of the reasons of this is to fund my trip somewhat, I will be charging a little bit for fuel and such, but no where near the amount you would have to pay for shipping through ups/fedex/some other gay shipping company.

[tim99ws6]

how much for the 9"??

[danhr]

1950 + small delivery charge?

[tim99ws6]

1800+a case of beer?

[danhr]

is it for you or for a customer?

[tim99ws6]

Customer.

[danhr]

negative.... just for the fact that a friend of mine up here said if i still had it in march, he would take it for 2k. if it was for u personally... maybe.

[tim99ws6]

4.11's right?

[danhr]

negative. motive 4.30s

[ZTwentyAteU]

how much fer tq arm.

let me guess, I need to find you another transmission....I will try!